Category: Chart

Behringer Neutron Blank Patch Chart

9/30/2018

In June, Sylvia and I traded-in our "Roland System-1m" ($600) for the "Behringer Neutron" ($300). It finally arrived last week.

The System-1m is a nice-sounding Synth. It also has several Patch Points. However, most of the time when I wanted to create a certain sound or Patch our Eurorack Modular into it, the System-1m just didn't offer the flexibility we needed.
The Neutron, on the other hand, has 56 Patch Points, which allow for many combinations of Control Voltage signal flow and audio modification.

The digital Oscillators in the System-1m made them very stable and tracked across the keyboard very well. We were pleasantly surprised to find the Neutron's analog Oscillators are also very stable.

There's a very good Review of the Neutron over at SonicState. Here's the link:
sonicstate.com/news/2018/04/05/sonic-lab-behringer-neutron-analog-desktop-semi-modular-review/

Because I learned Synthesizers the "old school" way, with "Patch Charts", I wanted to be sure there was one available. The User's Manual does have a handy Patch Chart on page 27 but I fine-tuned it just a bit for our purposes. I have included it below for anyone to Download.

A "Patch Chart" is used with Synthesizers which don't offer a "Save" or "Store" for your sound creations. I realize that some Artists simply want the "journey" to be the "sound". That's fine but there may still be times when you'll want to start with a certain "sound foundation" and, without being able to Save a Patch electronically, a "Patch Chart" will come in very handy.

If you've never used a Patch Chart, there are no real "rules" of how to draw-out and explain a Patch. So, for what it's worth, these are a few things I've learned over the years on how to write-out a Patch so you'll understand it years from now:

When drawing lines where your Patch Cables are to be connected, be sure to use a contrasting ink color. Since the Blank Patch Chart I made has "black" lines, I always use a "red" pen to draw the Cable lines.
Explain as much as you can and be clear as to "what goes where". Remember, someone else may need to "interpret" your notes or YOU may be wanting to recreate that Patch in the future. You might know exactly how all the knobs, buttons and cables are set but after working with hundreds of Patches and several other Synths, you're going to want a simple layout and instructions on every Patch Chart.
Be consistent. Although you may only be dealing with 1 or 2 Patch Cables in the beginning, your Neutron may later become part of a larger system, maybe a Eurorack Modular. So, even though it's easy to draw a straight line from the "LFO Out" to the "OSC1 In", once you start dealing with 10, 20, 50 or more Patch Cables, you'll end-up with random lines on your Patch Chart if you don't think-through "where" those lines are going to be drawn.
One way to indicate that 2 Patch Cables cross each other, is to draw a rounded "wow". See my examples below:

I've also included a Patch Chart example (below). At this point, Sylvia and I have only spent a few hours with the Neutron. So, although this "example Patch" is nothing special, it will give you an idea of one way to write-out a Patch.